Setup and Using MoonRay RayWare Software integration

Setup and Using MoonRay RayWare Software integration

Effective with the May,  2018 update to EasyRx, EasyRx now integrates with MoonRay RayWare software, allowing you to easily select based STL files in EasyRx and open these files in RayWare. 

Integration Notes:
  • The integration can be enabled on any machine with RayWare installed
  • RayWare version 1.4.0 3rd Party integration or higher is required
  • The Integration requires the EasyRx Web Extension v2.0 to be installed on each machine with the integration enabled
  • The EasyRx Web Extension is supported on Chrome and FireFox. 
  • If you run both Chrome and FireFox on the same machine, the web extension installer must only be run one time. 

Enabling the integration 
  • For practices, go to Account Settings -- 3rd Party Integrations and move the slider to the on position under RayWare.
  • For labs, go to Configure --> 3rd Party integrations and move the slider to the on position under RayWare.






When the integration is enabled, EasyRx automatically downloads the EasyRx Web Extension installer.  After the installer has finished downloading, click open to run the installer. Reminder: The EasyRx Web Extension must be installed for the integration to work.


Follow the instructions to run the installer. It will only take a few seconds for the installer to complete. Once the Web Extension is properly installed, the integration is ready to go.

NOTE: The EasyRx  Web Extension is only compatible with PCs. It is currently not compatible with MAC OS platform. 

Using the integration 
You can access the integration from the View STL Print List Screen and when viewing Patient Information:

Using the integration from the View STL Print Print Screen
Go to the EasyRx 3D - View STL Print List Screen 





This loads the STL Print List screen:


From this screen, select the files to be printed by clicking the appropriate checkbox and click the RayWare icon.   EasyRx will launch RayWare software and "pass in" the selected STL files.  One click to open files for 3D printing!  

Using the from the Patient Screen

To use the integration, lookup the patient, click View and scroll down to the File Uploads section.  You will see the RayWare logo next to each file in the File Uploads section.
Click the RayWare logo on the row of the file you wish to open to launch the integration.   



For example, to open the 161147_Hollow.STL file, click the RayWare logo on that row. 

When the logo is clicked, this automatically open RayWare and passes in the STL to the RayWare software. 



Opening Multiple Files from the Patient Screen 
To open multiple STL files, leave RayWare software open, go back to EasyRx and click the logo on the row of the file you wish to open. This will pass in additional STL files to the already open copy of EasyRx:

Have questions? Need help with setup?  Don't hesitate to contact us.

Thanks,

The EasyRx Team

    • Related Articles

    • Setup and Using the 3D Systems NextDent Sprint Software integration

      Effective with the April, 2018 update to EasyRx, EasyRx now integrates with 3D Systems NextDent Sprint software, allowing you to easily select based STL files in EasyRx and open these files in 3D Sprint software. Integration Notes: The integration ...
    • Setup and Using EnvisionTEC Perfactory RP Software integration

      Effective with the April, 2018 update to EasyRx, EasyRx now integrates with EnvisionTEC Perfactory RP software, allowing you to easily select based STL files in EasyRx and open these files in Perfactory RP.  Integration Notes: The integration can be ...
    • Setup and Using MiiCraft MiiUtility Integration

      Effective with the July 28, 2018 update to EasyRx, EasyRx now integrates with MiiCraft MiiUtility software, allowing you to easily select based STL files in EasyRx and open these files in MiiUtility.  Integration Notes: The integration can be enabled ...
    • Setup and Using the EasyRx -- FormLabs Preform integration

      Effective with the December 2017 update to EasyRx, EasyRx now integrates with FormLabs Preform software, allowing you to easily select based STL files in EasyRx and open these files in PreForm.  Integration Notes: The integration can be enabled on ...
    • Setup and Using Oasys Integration with EasyRx

      EasyRx Practice Standard and Premium users now have the ability to integrate EasyRx with Oasys! The integration allows you to launch EasyRx from Oasys and open existing patients or add new patients to EasyRx in just a few clicks!   Sections 1 and 2 ...