EasyRx - Help Center

            Recently added Parts and Appliances in EasyRx

            We are continually updating the the EasyRx Universal Library of Parts and Appliances. As new parts or appliances are added, we'll update the list here. 
            • For Practices: New parts are active in the EasyRx Universal Library of Parts and Appliances and the In-House Library of Parts and Appliances. 
            • For Labs: New parts are active in the EasyRx Universal Library of Parts and Appliances and assigned to a default Parts Category. You should review the parts and assign to your preferred Parts Category.
            Are you missing or need a part / appliance added? Email us first at support@easyrxortho.com to verify it doesn't already exist. If not, you can request a new part or appliance to be added. Download the attached PDF template to draw/sketch the part you require. Scan and email the completed form to support@easyrxortho.com. We'll review and be in touch to discuss. 

            NOTE:  The View the complete Parts and Appliance List, open the View Parts & Appliance Library on the Account Menu:




            Changes Posted November 9

            We added a few more parts this weekend:

            Soldered V Hook.
            We added several movements to the Soldered V Hook.

            The hook can now be placed in the positions shown in the screen slot and flipped as needed.







            Tandem Expander
            You can now remove the upper or lower component of the Tandem Expander, as needed.  You can drag off the upper or lower or delete it from the Parts panel below. One remove, the following message is displayed.   Choose Sub-Part to remove either the upper or lower. 




            Mushroom Spring
            The Mushroom Spring now supports more movements.  It now supports movement to any combination from 1-1 to 8-8:




            Bass Spring




            RPE

            The RPE now supports movements to the 4, 5s and 6s:



            Resta Clasp






            Part Changes November 2
            Memotain Retainer
            We added the Memotain Retainer to the AOA Parts Library. It is now available to all practices submitting cases to AOA:



            Closed Loop Labial Bow




            Part Changes October 27

            Barme RPE




            Tongue Crib - 3 Loops




            Tongue Guard 







            Part Changes October 20

            We added new different colored Essix Retainers
            • Essix retainer - Blue
            • Essix Retainer - Green
            • Essix Retainer - Orange
            • Essix Retainer - Pink
            • Essix Retainer - Yellow

             




            Part Changes October 10

            Deimpactor Appliance



            Contoured Labial Bow
            We added a Part Option to draw the Labial Bow Contoured:


             
            Hyrax RPE with Rests




            Higgins Crossbow with Soldered Stops



            Distal Jet with Tads





            Bilateral Mandibular Pivots




            Part Changes September 7

            Front Cross Over Bow with Loop



            Lingual Face Mask Hooks



            Theroux Retainer - No Acrylic 



            Rickonator



            Rickonator Plus




            Bonded RPE can now be moved to the 3s




            Part Changes August 24

            New Part:  Lower Lingual Wire and Upper Lingual Wire


            The TPA w/ extensions can now be placed on the 7s:




            Part Changes July 28, 2018

            Tongue Thrust Inhibitor



            Upper Lingual Holding Arch with loops


            Transpalatal Arch with Acrylic Button 


            Spring Aligner with 2 piece Acrylic - Upper and Lower 


            Part Changes

            • Carriere Bar can now placed on the 3s, in addition to the 2s
            • The 3 x 3 Bonded Retainer has been renamed to Bonded Lingual Retainer
            • Distal Soldered Occlusal Rest can now be placed on the 6s

            Part Changes Scheduled July 2, 2018

            Upper Spring Aligner with 2 Piece Acrylic 




            Lower Spring Aligner with 2 Piece Acrylic 






            Part Changes and Additions June 2018
            Crozat Clasp 




            Hard Night Guard


            Bilateral Distal Jet - can now be placed on the lower
            NOTE: If you have this part added to a appliance, you'll need to remove and re-add the Bilateral Distal Jet to the appliance



            3 x 3 Krouse can now be moved to the 4s




            Part changes and additions May 2018
            We've added two pontics with wires
            • Plastic Pontic with Wire
            • Fixed Pontic Wire






            We've added Carriere Buttons to compliment the Carriere bar:



            Tandem Expanser





            Hook Rest - can now be placed 4s to 7s


            E-Arch - can now be flipped to show the spring on the left or right



            Occlusal Face Mask Hooks now go between the 2s and 3s



            RPE with Reverse Headgear Hooks




            Part changes and additions April 2018
            We've added the new Envisium patented palatal appliance. For more information, visit www.envisium.net.



            NOTE: This part is only available practices connected to the Envisum Connected Lab account.

            Mara part can be placed only on upper / lower or both.
            To do so, place the Mara on the prescription and remove lower / upper as needed.  When removing, choose remove sub-part:




            Hang Expanser can now be moved to the 4s and 7s



            New part RPE with Reverse Pull Headgear Hooks




            Plastic and Fixed Pontic with Wire
            We've added two new parts: Plastic Pontic with Wire and Fixed Pontic with Wire, the illustrate the wire being extended into the acrylic




            Part changes and additions February 2018
            Occlusal Facemask Hooks



            Carriere Bar - with movement
            Carriere Bar - with movement 2-3, 2-4, 2-5
            Can be placed on upper and lower







            Roncone RPE
            Rear arms can be moved to the 7s




            Modified Mushroom Spring -
            Can now be moved to the lower.





            Parts added December 2017

            Modified Mushroom Spring




            Halterman Extension can now be flipped to show on lingual




            Bloor Spring can now be flipped to support placing on the buccal side.





            Headgear in Acrylic can now be moved between the 5s, 6s and 7s


            Continuous Rest can now be placed on Upper


            Parts added November 2017

            Fixed Palatal Expander




            Fixed Palatal Expander w/ Hooks



            HAAS Palatal Separator w/ Arms



            VECS Palate Expander


            Full Occlusal Coverage


            Miranda TPA



            Invisible Retainer - Upper and Lower


            Tongue Spur
            The Tongue Spur can now be placed on the upper and lower



            10MM Buccal Tube - No Hooks
            We've added a 10MM Buccal Tube



            Parts added October 2017

            Snap Lock RPE



            Essix Retainer
            Supported on both upper and lower



            Parts added September 2017

            Universal Pre-Activated Expander



            Upper and Lower Miniscope Telescopic Herbst



            Lingual Wire Template
            The Lingual Wire Template can now be drawn in the middle of teeth.  Supports from 4s to 1s.






            Parts added July 2017
            Buccal Bar





            Parts added June 2017
            Roncone RPE



            Parts added April 2017
            Lingual Wire Template


            Invisible Retainer -- 
            We've added more flexibility to movement on the Invisible Retainer 



            Theroux Retainer



            Parts added March 2017
            Crown
            We've added a Crown Part, which can be placed on any tooth.


            Lee Bow



            Pop Off Ball Clasp



            Parts added February 2017
            The Soldered Ball Clasp can now be flipped mesially




            Crozat 


            Fixed Scalloped Lingual Retainer with Tray
            Fixed Scalloped Lingual Retainer



            Mara -- 


            Parts added January 2017

            Soldered Ball Clasp
            Note
            : The part will automatically "flip" depending on what side of the arch it is placed- meaning the ball of the clasp will always face away from the midline.


            Bracket

            Part Note:
             Some offices that want a Banded Bracket can simply use the Bracket part, then add a Band ontop of it! See example below.



            Compact RPE 
            You can now position the compact RPE on the 5's



            Helical cross-over spring 


            Halterman Extenstion 


            Hybrid Cross Spring (combination of anterior finger spring and criss-cross spring)



            Transpalatal Arch w/Offest - We've added more mobility to the TPA  - Bands can now be placed on different teeth on opposite sides of arch





            TADs can now be placed in space on the prescription and a wire is available to drag the to appliance framework:





            Parts added October, 2016:

            New positioning available for the Posterior Bite Plate - positioning can now extend over the upper and lower 3s / canines


            Bluegrass with Beads


            Leaf Expander - Small - 6MM



            Leaf Expander - Large  -10MM



            MSE




            Parts added September, 2016:

            Biobloc


            Hang Expanser


            Intrusion TPA


            Lingual Sheath

            Headgear Tubes can now be placed on the 4 and 5s, in addition to the 6s and 7s.



            April 15, 2016 - Existing part update
            Fixed Lingual Retainer (for upper and lower) now has ability to extend to the 4s
               

            April 8th, 2016 -- New Parts and Appliances added:

            Spring Loaded Lingual Arch

            Pontic Wing 
            +has additional 'part option' to flip orientation

            Arch Spring

            Hang Clasp

            Retraction Bar


            Helpful?  
            Help us to make this article better
            1 0