Setting up and using the Nexa 3D Printer integration with EasyRx
EasyRx and Nexa 3D Printer integration
3D Printer integrations only apply for practices that have EasyRx 3D-Standard and Premium subscriptions, or labs that have Standard+3D, Enterprise, or VisualDLP subscriptions.
Setting up the EasyRx and Nexa 3D integration:
1. From your dashboard, click on your practice name (in blue font), at the top-right corner > Click Account Settings > Click 3rd Party Integrations:
2. Scroll down to 3D Printers > Nexa 3D > then click the grey toggle to turn on the toggle:
3. A file will automatically download - the file might show on your browser or you can locate the file in your Downloads folder > double-click or Run the file to Install > follow the prompts, then Click Close:
Once the installation is complete, you are ready to start using the integration from your EasyRx account.
Using the Nexa 3D Printer integration from your EasyRx account
There are a couple of ways to use the Nexa 3D integration to pull ready-to-print (RTP) files from your EasyRx account over to Nexa 3D Printer software:
1. The best and most efficient way to pull RTP multiple files is from your STL Print List or 3D Command Center. From these pages, you'll select the RTP files on the left, by selecting their checkbox, then click on the Nexa 3D icon at the top-right to send those files to your Nexa 3D software where you'll then position them as you wish and eventually send to print:
The 3D Command Center is only available to accounts that have added 3D AI software services to their subscription.
2. This option would be to pull single files from a patient record/chart in EasyRx. Go to Patients > search/find your patient by typing patient's first and/or last name in the Search field > Click View on the far-right > (re-direct to patient EasyRx chart/record) Scroll down to all files > find the file you would like to print > Click on the Nexa 3D icon to the right of that file:
And that is how to set up and use your EasyRx and Nexa 3D Printer integration!
Please feel free to reach out to our Customer Support if you have any questions:
Practice and Lab Support
Phone: 1-888-340-3751
Email: support@easyrxcloud.com
Related Articles
All 3rd Party Integrations with Links for Setup
Practice Management (available ONLY for Standard and Premium EasyRx accounts): CareStream Orthotrac: OrthoTrac Integration - How to setup and use the EasyRx / Carestream (CS) OrthoTrac integration Cloud 9: Setting Up and Using The Cloud 9 Integration ...Enabling The EasyRx Uniz 3D Printer integration
EasyRx now integrates with Uniz 3D Printers EasyRx is excited to announce our 3D Printer integration with Uniz 3D Printers Requirements Uniz version 1.4.0.25 or greater Windows 10 or greater EasyRx Practice or Laboratory account. Windows account ...TOPS Integration Window not Allowing Certain Actions
Troubleshooting TOPS Integration Window Issues on Mac When using EasyRx through TOPS on a Mac, some users have reported encountering the following issues: 1. Faint Patient Name: The patient name appears very faint and may be difficult to read. 2. ...Enabling and using the EasyRx / Dolphin Imaging & Management Integration
Requirements: You must have an EasyRx monthly or annual subscription of EasyRx Practice Standard or Standard + EasyRx 3D or Premium Users now have the ability to integrate EasyRx with Dolphin! The integration, which applies to both Dolphin Imaging ...Setup and Using Oasys Integration with EasyRx
EasyRx Practice Standard and Premium users now have the ability to integrate EasyRx with Oasys! The integration allows you to launch EasyRx from Oasys and open existing patients or add new patients to EasyRx in just a few clicks! Sections 1 and 2 ...